Here we’re mounting a Holley 2300 on a Carter YF 1 barrel intake manifold using a small 1 barrel to 2 barrel Rocester adapter, and a 2 barrel Rocester to large 2 barrel Holley adapter. On top is a velocity stack from Cal Customs. All purchased from SummitRacing.com. This is a marine 500cfm Holley 2300 [...]
This is the only proven way to remove the steering wheel on an old Willys Jeep without destroying it. We use a Harbor Freight item # 30305 14-piece gear puller set and it comes off real easy without damaging the steering wheel.
Duration : 0:2:38
addthis_url = ‘http%3A%2F%2Fwww.andrecalixto.com%2Fwillys-station-wagon%2Fremoving-the-steering-wheel-on-a-willys-cj-23-pickup-or-wagon-part-3′;
addthis_title = [...]
This is the only proven way to remove the steering wheel on an old Willys Jeep without destroying it. We use a Harbor Freight item # 30305 14-piece gear puller set and it comes off real easy without damaging the steering wheel.
Duration : 0:1:15
addthis_url = ‘http%3A%2F%2Fwww.andrecalixto.com%2Fwillys-wagon%2Fremoving-the-steering-wheel-on-a-willys-cj-23-pickup-or-wagon-part-2′;
addthis_title = [...]
This is the only proven way to remove the steering wheel on an old Willys Jeep without destroying it. We use a Harbor Freight item # 30305 14-piece gear puller set and it comes off real easy without damaging the steering wheel.
Duration : 0:1:56
addthis_url = ‘http%3A%2F%2Fwww.andrecalixto.com%2Fwillys-station-wagon%2Fremoving-the-steering-wheel-on-a-willys-cj-23-pickup-or-wagon-part-1′;
addthis_title = [...]
Here is my 1961 Willys 4×4 Jeep station wagon project. After rebuilding the transmission and transfer case and pulling the oil pan to inspect the engine internals, I installed Accel multiple-spark/multi-strike capacitive-discharge ignition as well as an Accel Super Stock coil. The carburetor is a marine Holley 2300 500cfm off of a 5.7L marine crate [...]
Here we’re going over a few details on the disc brake conversion on a Willys station wagon (same for CJ-2A/3A/3B and pickup). We use 1976-1977 Jeep CJ rotors (the older thicker ones) with the same 5×5.5″ bolt pattern, with 6 bolt GM 1/2 ton brake backing plates. These GM backing plates mount straight to the [...]
