Willys Wagon » running

1956 Willys CJ5 Jeep with Chev 350 engine

admin — Wed, 19 Oct 2011 14:06:20 +0000

One redeeming feature of the jeep I bought (discounting the poor mounting and host of other issues), was the Chevy 350 that was installed in it, including the Edelbrock carb and covers.
Once it was remounted and the fan retuned (the original fan sucked so little air as to be useless, but before remounting the engine didn’t give enough room for anything else. Thats fixed too now)

So, give it a listen, and it makes me happy to hear it running so nicely. Probably still needs some minor fine tuning, but seems to be doing pretty good otherwise.

Duration : 0:0:59

Technorati Tags: 350, Big, Chevy, cj5, engine, jeep, roar, running, willys

Jeep Willys 1951

admin — Fri, 29 Oct 2010 02:14:04 +0000

Jeep com o motor ligado.
Jeep engine running.

Duration : 0:2:9

Technorati Tags: 1951, 51, cj-3a, cj3a, engine, flat, flathead, funcionando, head, jeep, Jipe, motor, overland, running, willys

1973 Jeep Commando 304 V8 running

admin — Thu, 21 Oct 2010 02:36:59 +0000

It’s my Jeep. 1973 Commando, with an AMC 304 V8. It has an Edelbrock Performer intake, Performer 600cfm carburetor, MSD blaster igition box and coil, Motorcraft Duraspark II distributor, and dual cherrybomb turbos.

Duration : 0:1:36

Technorati Tags: 304, amc, commando, edelbrock, jeep, jeepster, running, v8

Bruces Willys pickup

admin — Sat, 09 Oct 2010 02:57:12 +0000

second time started bit of a run to clean out sweet as

Duration : 0:3:0

Technorati Tags: 008, 2, board, construction, running

1967 Jeep Jeepster Commando Running On eBay

admin — Sun, 21 Mar 2010 09:42:16 +0000

A 1967 Jeepster Commando starting up and running for sale on eBay. This thing is mint!!! Our user id is auctionking_consignments.

Duration : 0:0:42

Technorati Tags: 1967, commando, ebay, jeep, jeepster, running, Starting

Hot Rodding the Eazy Project (Dad’s Truck)

admin — Thu, 11 Mar 2010 05:43:06 +0000

Took some parts off a engine I had in my shop whose pistons split apart (literally) It had a carburetor from a Jeepster on it, and a intake manifold from the same. A vacuum advance distributor was also installed. On top of all this it has a Kaiser Supersonic head was installed (higher compression).

Since my dad’s truck wasn’t running the best with the stuff it had on it, I decided to take the parts from the other engine and install it on the Eazy Project to get a little better performance.

Took only about 9 hours to swap everything over, that’s including cleaning and watching paint dry.

New points, rotor, cap, and wires were also used. Runs great, but still need to fix a few things with the throttle linkage.

Duration : 0:1:1

Technorati Tags: 134, dad's truck, flathead, go-devil, head, hot, idle, jeep, Kaiser, repair, rod, rodding, run, running, Supersonic, truck